Forklift Forks - The two styles of forks comprise the pin type and the hook type. Pin type blades or also known as shaft mounted, are utilized on the larger capacity lift trucks. Pin type blades use the fork shaft or pin in order to mount onto the lift truck. There is an eye on the topmost part of the tine that the pin slides through and holds the blades onto the carriage. Hook type forks are normally utilized on trucks as much as fourteen thousand pounds capacity. Hook types are name because they hook over and secure into the bars on the fork carriage. These forks could be effortlessly mounted by means of sliding lower and upper hooks onto the end of the carriage bars. Another assembly alternative is using a special blade loading notch in the center of the lower carriage mounting bar.
There are industry standards for sizes of the blades. forks are load rated according to both thickness and width. Whenever blades require replacing, it is critical to make certain that the new fork is rated the same as the older forks it's replacing. This tine rating would be stamped on the shank of the fork.
Using lift trucks could greatly minimize labour and time in various industrial applications. Having the appropriate blades attached on the device would enhance safety and efficiency.
Know the type of blades needed in order to complete the task since there are various types. Palletized materials could be safely moved using somewhat blunt-end style blades, whereas non-palletized material such as cardboard boxes needs a sharp-ended fork capable of sliding below the box. Check with your instructor or manager to be able to know the proper forks designed for the workplace application.
Each lift truck has its' own design and right method to change the blades therefore refer to the instruction booklet for your specific unit. Determine whether or not your unit has quick-change blades. A lot of newer units have this fork style to be able to make changing forks an easier task to complete in less time. Consult the manufacturer's instructions to remove the forks accordingly. Most quick-change forks drop mechanically. Ensure the side shifters are placed in the correct place so the new attachment or blades fit rightly on the forklift. Attach the lifting attachment or forks in accordance to the lift truck's instructions. Consult the operation manual if required and once they are locked, do a safety check previous to loading the new blades for the first time.
Click to Download the pdf