Please ensure all fields are filled in completely.
To view previous winner: Click Here


Personal Information:


Going to college is a big financial commitment. Write an essay that outlines how much you expect to spend to finish your schooling, how you intend to pay for your schooling, and what you expect your job to be once you are finished your schooling. There is no word limit for the essay.

Fork Mounted Work Platforms

Fork Mounted Work Platforms

around the web

Fork Mounted Work Platform - There are specific requirements outlining lift truck safety standards and the work platform ought to be constructed by the manufacturer to comply. A custom designed work platform can be designed by a professional engineer as long as it also meets the design standards in accordance with the applicable lift truck safety requirements. These custom-made designed platforms should be certified by a professional engineer to maintain they have in fact been made in accordance with the engineers design and have followed all standards. The work platform needs to be legibly marked to show the label of the certifying engineer or the maker.

There is several particular information's that are considered necessary to be make on the equipment. One example for custom-made machinery is that these require a unique code or identification number linking the certification and design documentation from the engineer. When the platform is a manufactured design, the part number or serial so as to allow the design of the work platform must be marked in able to be associated to the manufacturer's documentation. The weight of the work platform when empty, in addition to the safety requirements that the work platform was constructed to meet is among other vital markings.

The rated load, or also called the utmost combined weight of the devices, individuals and materials allowed on the work platform must be legibly marked on the work platform. Noting the minimum rated capacity of the forklift which is needed in order to safely handle the work platform can be determined by specifying the minimum wheel track and forklift capacity or by the model and make of the forklift which could be utilized with the platform. The method for fastening the work platform to the fork carriage or the forks must likewise be specified by a professional engineer or the maker.

Different safety requirements are there to be able to ensure the floor of the work platform has an anti-slip surface. This must be situated no farther than 8 inches more than the standard load supporting area of the blades. There must be a means offered to be able to prevent the carriage and work platform from pivoting and revolving.

Use Requirements

The forklift has to be utilized by a skilled driver who is authorized by the employer to be able to use the machinery for hoisting staff in the work platform. The work platform and the lift truck should both be in compliance with OHSR and in good condition prior to the application of the system to hoist workers. All producer or designer directions which relate to safe operation of the work platform should likewise be available in the workplace. If the carriage of the lift truck is capable of pivoting or revolving, these functions ought to be disabled to maintain safety. The work platform needs to be locked to the fork carriage or to the forks in the precise way provided by the work platform manufacturer or a professional engineer.

Another safety standard states that the combined weight of the work platform and rated load should not go over one third of the rated capacity for a rough terrain lift truck. On a high lift truck combined loads should not go beyond 1/2 the rated capacities for the reach and configuration being used. A trial lift is needed to be carried out at each and every job location instantly previous to hoisting employees in the work platform. This practice guarantees the lift truck and be placed and maintained on a proper supporting surface and likewise so as to guarantee there is sufficient reach to position the work platform to allow the task to be finished. The trial practice likewise checks that the boom can travel vertically or that the mast is vertical.

A trial lift should be done at each task location instantly prior to lifting staff in the work platform to ensure the lift truck could be positioned on an appropriate supporting surface, that there is enough reach to place the work platform to allow the task to be completed, and that the mast is vertical or the boom travels vertically. Utilizing the tilt function for the mast could be used to assist with final positioning at the task site and the mast should travel in a vertical plane. The test lift determines that adequate clearance could be maintained between the work platform and the elevating mechanism of the lift truck. Clearance is likewise checked according to overhead obstructions, scaffolding, storage racks, and any nearby structures, as well from hazards such as energized machinery and live electrical wire.

A communication system between the lift truck driver and the work platform occupants ought to be implemented in order to safely and efficiently control work platform operations. If there are many occupants on the work platform, one individual has to be chosen to be the main person responsible to signal the forklift driver with work platform motion requests. A system of hand and arm signals ought to be established as an alternative method of communication in case the primary electronic or voice means becomes disabled during work platform operations.

Safety standards dictate that staff should not be transferred in the work platform between task sites and the platform has to be lowered to grade or floor level before anyone enters or leaves the platform also. If the work platform does not have guardrail or sufficient protection on all sides, every occupant has to have on an appropriate fall protection system attached to a selected anchor point on the work platform. Personnel have to perform functions from the platform surface. It is strictly prohibited they do not stand on the guardrails or utilize any devices so as to increase the working height on the work platform.

Lastly, the lift truck driver is required to remain within 10 feet or 3 metres of the lift truck controls and maintain visual contact with the lift truck and with the work platform. If the lift truck platform is occupied the driver should follow the above standards and remain in communication with the work platform occupants. These guidelines assist to maintain workplace safety for everyone.

pdf Click to Download the pdf

Forklift Parts
Zoom Boom Part
Parts for Zoom Booms - A boom truck is sometimes recognized by the cable and phone company vans that have the long arm folded over their roofs. Usually, a bucket-like equipment sits at the extension of extendable arms. Sometimes known as a cherry pic...

Torque Converter for Forklift
Forklift Torque Converters - A torque converter in modern usage, is commonly a fluid coupling that is utilized to be able to transfer rotating power from a prime mover, for instance an internal combustion engine or an electrical motor, to a rotating...

Work Platforms
Work Platforms - Forklift platforms add more flexibility for individuals who need to reach elevated heights with their forklift. These platforms would make it easier for employees to work effectively and safely at high levels. Lift truck platforms ar...

Attachment for Industrial Forklift
Attachments for Industrial Forklifts - Lift truck platforms provide much more flexibility for individuals who work off of a forklift. These platforms are useful machinery because they provide a high level of safety for employees on top of them as wel...

Warehouse Forklift Parts
Parts for Warehouse Forklift - A vital part of the supply chain is the Warehouse Management System. It primarily aims to manage the movement of products and storage of materials inside a warehouse, together with the related transaction comprising rec...

Drive Motor for Forklift
Drive Motor for Forklift - MCC's or likewise known as Motor Control Centersare an assembly of one section or more which include a common power bus. These have been used in the vehicle business since the 1950's, for the reason that they were used lots...

Bale Clamp
Bale Clamps - Bale clamps are actually hydraulic forklift accessories that can be utilized so as to carry bales with out a pallet. This particular attachment is practical if you are piling or moving a lot of goods. Bar arm clamps are additional acces...

Part for Pallet Lift
Pallet Lift Part - A pallet lift is a piece of equipment dedicated in the maneuvering of pallets of many dimensions and weights. They can be utilized as an accessory for forklifts, cranes and other styles of heavy machinery or be applied on their own...

Lift Parts Express
All our forklift parts are offered at the best prices. For a quote on a part or attachment we offer, please call us at:

TOLL FREE: 1-888-695-7994


Email Us
About Us